RCScrapyard ► Iconic Vintage Radio Controlled (RC) Model Car Archive ► Schumacher Nitro 21 XTR 3E Desert Storm.
RCScrapyard Radio Controlled Models
Flags

1/10 Scale Nitro Truck/Truggy:

Schumacher Nitro 21 XTR 3E Desert Storm (Radio Controlled Model)


Navigation: Sitemap  >  Manufacturers  >  Schumacher

All Manufacturers: Model Types  >  Trucks/Truggys  >  1/10 Nitro Trucks/Truggys

History, Info (and How To Set-up Tips) for the Schumacher Nitro 21 XTR 3E Desert Storm:


  Released by Schumacher in 2002, the 2WD Nitro 21 XTR 3E Desert Storm, came 90% pre built, with a 21XT-R Race Engine and 3 Speed Gearbox.

  Based on the same aluminium plate pan chassis as the original Schumacher Cougar, the design is belt driven, with coil spring over oil filled dampers and a ball differential. For stunt driving, a wheelie bar was included in the kit.

Schumacher Desert Storm 21 XTR 3E - 1:10 Nitro RC Truck
▼ Scroll Down for More Images ▼


  To race the Schumacher Desert Storm 21 XTR 3E, it must be fine tuned to improve handling, provide responsive steering and give you the grip to cruise around corners at high speed, without slipping off the track. Small adjustments can make a Big difference and our step by step procedure, will guide you to the best Set-up for your individual driving style.

  Our simple guide explains "run in" and what to look for as you tune the Nitro Engine for your Desert Storm 21 XTR 3E.

  Using plain language, our guide will show you how to avoid Radio interference, and Servo Twitch, by positioning your radio receiver and implementing the latest innovations. Find out how to reduce friction and improve the performance of your Schumacher Desert Storm 21 XTR 3E Bearings with a few common sense hints and tips.









Gas/Nitro Engines Body Shells Radio Transmitters etc Tires Wheels/Rims Electronic Speed Controllers Battery Packs / Chargers Electric Motors












Items For Sale:






Flags

★ Schumacher Desert Storm 21 XTR 3E ★
Schumacher Desert Storm 21 XTR 3E

★ Schumacher Desert Storm 21 XTR 3E Chassis ★
Schumacher Desert Storm 21 XTR 3E Chassis


Buying a Used Schumacher 21 XTR Truck (and What to look for)


   Buying a used Schumacher 21 XTR Nitro Truck, or any used RC Model, has a number of advantages. It is generally cheaper than new, ready built and may come with a variety of expensive hop-ups already installed. Cheap, pre-loved bargains are always becoming available. However, depending on the age of your purchase, it may need a little tender loving care before you can take it out on the back yard.

   The one thing you will always need is an instruction manual. If not supplied with your purchase, they can often be downloaded from the Schumacher website, or purchased separately on eBay. With an instruction manual, any problems with your model Truck you may discover can easily be fixed.

Dampers
   When you receive your used Schumacher Truck, make a general visual inspection of the chassis, front and rear wishbones, suspension shock towers etc, for any broken parts that may need to be replaced. Then, take a screwdriver and box spanner and check each self tapping screw and nut for security, taking care not to over tighten.

   Next, for those Schumacher models with oil filled shock absorbers, remove them from the chassis and dismantle the coil springs. The damper shafts should push in and pull out with a smooth action. If you feel a jolt as you change direction, this means the oil has leaked out and must be topped up. At the same time, change the O-Ring seals to prevent more leakage. Also check the damper shafts for damage. If they are scratched, change them as soon as possible.

   If the body shell of your Schumacher 21 XTR is broken, ripped or damaged in any way, this can be easily repaired with rubber solution glue. Also, for added protection and if available for your 21 XTR model, fit an under guard to stop dirt and gravel entering the chassis.

Titanium Turnbuckles
   Examine the drive shafts for wear and replace as required. If possible, change them for titanium. The steel shafts wear and bend too easily.

   If you intend to race your 21 XTR Truck model at a competitive level, I would also recommend you obtain and fit titanium pivot shafts, turnbuckles, tie rods and steering rods.

   Drive Belts need checking at regular intervals for wear, tension and damage. If deemed necessary, adjust the tensioning pulley until the belt can be depressed in the centre by no more than around 5mm. If the belt was slack, also examine the drive pulleys for wear. The teeth should provide a well seated fit for the belt teeth and not be rounded on the corners. If the belt teeth do not fit snugly, change the pulleys as soon as possible. For top level racing it may be prudent to replace all belts and pulleys after each race meeting.

Spur Gears
   Gears are a weakness on all Truck RC models. Head on collisions can easily damage the gear teeth on nylon and plastic spur gears. Heavy impacts can also loosen the nuts or self tapping screws that hold the Nitro Engine in Position, allowing the pinion gear to pull out of mesh slightly and rip the tops off the teeth on your spur gear. To minimise this possibility, fit bolts with locking nuts to the Nitro Engine mount and remember to check them for security after every two or three runs.

   Ball joints always cause problems. For top level Nitro Truck racing, the plastic ball connectors should be checked and if deemed necessary changed after every meeting. A simple thing like a loose fitting connector popping off could easily end your race, so better safe than sorry.

Servo Gears
   The 21 XTR steering servo is also prone to damage. In high speed crash situations, the fragile gear teeth of the servo can be broken off, rendering your expensive servo useless, so be sure to obtain a good quality "Servo Saver". Check out my Servo Information article.

   If body roll on your Schumacher 21 XTR is a problem, handling can be improved with the use of stabilizers, anti roll or sway bars, stiffer tuning springs and, or, thicker silicone oil in the dampers.

Ball Bearings
   If your used Schumacher Truck comes with plastic and sintered brass bushings (ring type bearings), check the shafts that run in them for wear. Dust and grit can get into these bearings and abrade the shafts. Therefore, you should replace them all with shielded ball bearings. If the model has been run with ring type bearings, you may have to change all the axles and driveshafts. For more information, take a look at my article, How to get the best from your Bearings.

   Finally, good luck with your 21 XTR model and good racing.


For More on how to Setup your Truck, check out my Hints and Tips page.


^ TOP ^












Manufacturers and Brands Catalogued and Listed by RC-Scrapyard.


   At present, the RC Model Manufacturers, Brands and Distributors covered by us are: ABC Hobby, Academy, Acme Racing, Agama Racing, Amewi, Ansmann Racing, ARRMA, Team Associated, Atomic RC, Axial, AYK, Bolink, BSD Racing, Capricorn, Carisma, Carson, Caster Racing, Cen, Corally, Custom Works, Durango, Duratrax, ECX - Electrix, Exceed RC, FG Modellsport, FS-Racing, FTX, Fujimi, Gmade, GS-Racing, Harm, HBX, Helion, Heng Long, Himoto Racing, Hirobo, Hitari, Hobao, Hong-Nor, Hot Bodies, HPI, HSP, Intech, Integy, Jamara, JQ Products, Kawada, Kyosho, Losi, LRP, Maisto, Mardave, Marui, Maverick, MCD Racing, Megatech, Mugen, New Bright, Nichimo, Nikko, Nkok, Ofna, Pro-Pulse, Protech, PTI, RC4WD, Redcat Racing, RJ-Speed, Robitronic, Schumacher, Seben, Serpent, Smartech, Sportwerks, Step-Up, Tamiya, Team-C Racing, Team Magic, Thunder Tiger, Tomy, Top Racing, Traxxas, Trinity, Tyco, Vaterra RC, Venom, VRX Racing, WLToys, X-Factory, Xmods, Xpress, Xray, XTM, Yankee RC, Yokomo, ZD Racing and Zipzaps.

   This is an ongoing project, with new and "lost in time" RC Model Brands being added as they are found and although most of those listed above have been covered in relative detail, some are still being researched and will be completed in the near future.





















★ Schumacher Desert Storm 21 XTR 3E Chassis ★
Schumacher Desert Storm 21 XTR 3E - 1:10 Nitro RC Truuck Chassis


Hints and Tips

Choosing a Nitro Engine.

   Once you have made your choice of RC model, you need the right engine to get you where you want to be out in front.

   Touring Cars: Nitro powered Touring cars require a specific ability. Your first consideration should be the tail pipe. A number of models will take only a rear tail pipe configuration, but the majority will accept the more conventional side pipe.
   Beginners should consider something with a moderate amount of power and a rotary carburettor for easier controlled handling. For top level tarmac track racing or those with more experience, look for an engine with good low end torque that has a slide valve carburettor to give you fast acceleration out of the corners.

   Trucks and Monster Trucks: Unlike on road Touring Cars, Off Road Trucks and Monster Trucks don't need that bottom end torque, unless you like to do wheelies. So something less powerful with a rotary carburettor will provide you with the smooth acceleration and less wheel spin required for controlled dirt track racing.
   If tarmac is your thing, where grip is not a problem and you have the experience, a slide carburettor may suit your needs better. Tail pipe choice is generally a matter of preference. Most trucks will accept both side and rear configurations.

   Buggys: By far the most popular Off Road Nitro RC Models there is a wide choice of Buggys out there, many of which now come with engine included.
   Most Buggy engines use a slide valve carburettor, but if you are new to RC you may be better off trying a rotary carburettor. High low end engines with throw up plenty of dust but if you can't keep it on the track you are wasting your money. So something with less power may be better for you until you feel more confident.

For More Setup Information check out my Hints and Tips page.







Hints and Tips

Glow Plugs

   Nitro Engines for RC Models, use a system to ignite the fuel mixture, that simply employs a wire coil in a small housing called a Glow Plug. To start the engine, a battery powered Starter, or Glow Igniter is connected to the Glow Plug and electric current heats the coil to white hot, so that when you pull start your engine, the air - fuel mixture in the cylinder is ignited. With the engine now running, the starter is no longer required. Heat generated under compression is enough to keep the coil element hot enough to keep the engine running.

   At some point, the Glow Plug originally supplied with your Engine will invariably burn out, so you will have to purchase a replacement. If your engine isn't too old you should be able to obtain a similar one, but if the manufacturer is no longer in business you may have a problem.
   If you still have the instruction book that came with your engine you may find there are a number of optional plugs available. Most Plugs generally have a code, indicating the plug elements effective operating temperature. These codes vary from manufacturer to manufacturer so be wary if you need to consider a plug from a different Manufacturer than that of your engine.

   Basically, Smaller engines run better with Hot Plugs and Larger engines prefer Cold.
   Nitro fuels for RC engines normally have between 10 to 40 percent Nitromethane (CH3NO2). If you use fuel with a high proportion of Nitro, err towards Cold Plugs. Less Nitro, Hot.

   For example, For a .12ci (2.1cc) Nitro Engine, burning High percentage nitro fuel, a mid range plug would be best for performance.
   While a .21ci (3.5cc) Engine, with Low percentage nitro fuel, would prefer a Hot Plug.

   One more thing you may at some point consider when determining the right plug, is the compression ratio of your engine.
   By removing one of the Head shims you can Increase the compression. More shims, Lower compression. This option is not something I would recommend to those with little knowledge, so if you want to try this please be sure to ask someone with more experience before risking your expensive engine.
   High compression ratio engines run better with Cold Plugs. Conversely, Low compression ratio engines need Hot Plugs.

   If for some reason you use the wrong plug, you will soon know by how the engine runs. With too Hot a Plug, the engine will overheat and could damage your engine. If you hear the engine miss fire at high revs and you see pit marks on the cylinder head and piston, try either a cooler plug, add a shim to the head, or lower percentage Nitro fuel.

   If your Plug is too cold, your engine will idle poorly, lose acceleration and top speed. You will also notice the smell of fuel from the tail pipe. However, be wary, this could also be because of a rich fuel mixture.

For More Setup Information check out my Hints and Tips page.










On/Off Road
RC Models:

Radio
Equipment:

Accessories: