RCScrapyard ► Iconic Vintage Radio Controlled (RC) Model Car Archive ► ABC Hobby Leggero
RCScrapyard Radio Controlled Models
Flags

1/12 Scale Electric On-Road Car:

ABC Hobby Leggero (Radio Controlled Model Review)


Navigation: Sitemap  ▶  Manufacturers  ▶  ABC Hobby  ▶  ABC Hobby Timeline

History + Information (and How To Set-up Tips):


  Introduced by ABC Hobby circa 2008, the 4WD Leggero Chassis, came RTR with a number of bodyshell options, including: Suzuki Cappuccino (Red) # 24400 - (Silver) # 24401 - (Green) # 24002, Mazda Autozam AZ-1 (Red) # 24405 - (Blue) # 24406 - (Black) # 24407, Honda Beat (Red) # 24408 (Yellow) # 24409, Daihatsu Copen (Yellow) # 24411 - (White) # 24412.

  The model is shaft driven, on a double deck chassis, with gear type differentials, coil spring over oil filled dampers and 16 ball bearings.

ABC Hobby Leggero
▼ Scroll Down for More Images ▼


  To race the ABC Hobby Leggero, it requires a high level of tuning for improved stability when cornering, to keep it on the track and give you more grip under acceleration. Even the smallest change in your cars settings can make a Big difference. Our simple to follow instruction chart will show how to attain the best Set-up for your personal requirements.

ebay









Gas/Nitro Engines Body Shells Radio Transmitters etc Tires Wheels/Rims Electronic Speed Controllers Battery Packs / Chargers Electric Motors












Items For Sale:






Flags

★ ABC Hobby Leggero Chassis ★
ABC Hobby Leggero Chassis

★ ABC Hobby Leggero Chassis ★
ABC Hobby Leggero Chassis

★ ABC Hobby Leggero Chassis ★
ABC Hobby Leggero Chassis

★ ABC Hobby Leggero Chassis ★
ABC Hobby Leggero Chassis


General Information and Advice

   For those starting in Radio Controlled Racing, here are a few Hints and Tips: Firstly, buy a Kit not an RTR. That way, if something breaks you will have some idea how to fix it.

   Radio Controlled Model Cars are very fragile and easily broken. The main parts to protect are the Front Wishbones, Suspension Shock Towers, Dampers, Hub Carriers, Kingpins, Uprights and Toe in Blocks, so make sure you have a good strong front bumper and Lexan or Hard Plastic Body Shell and if available for your model, a protective under tray, to prevent grit and dust getting into any moving parts.

   The Steering Servo is also a weakness in high speed crash situations, so get yourself some good strong Servo Mount and Servo Saver. Also I would recommend Titanium Shafts, Turnbuckles, Tie Rods and pivot/steering shafts and if available for your model, lightweight Titanium Drive shafts, dog bones and CVD (Constant Velocity Drives). The standard steel types are far too easily bent.

   Gearing is another problem area on RC model cars. Head on collisions can easily break off gear teeth on Nylon/Plastic Spur Gears and even Bevel Gears inside the Gearbox. Heavy impacts can also loosen nuts and self taping screws that hold the Motor in Position, allowing the Pinion Gear to pull out of mesh slightly and rip the tops of the teeth on your Spur Gear. To avoid this to some degree, fit locking nuts and a new motor mount from time to time, so the self taping screws that hold the motor in position have less chance to come loose.

   Ball joints always cause problems. For top level Radio Controlled model car racing, the plastic ball connectors should be checked and if deemed necessary changed after every meeting. A simple thing like a loose fitting connector breaking free could easily end your race, so better safe than sorry.

   Many New car kits come with Nylon and Sintered Brass Ring type bearings. My advice is to discard these before initial installation and buy a good Hop-up set of Shielded Steel Ball Bearings. Or if you are serious about your racing, Teflon or Ceramic Bearings.

   One final piece of advice about the Setup of your Car. Keep the Centre of Gravity as low as possible. Ride Height is all important. For On Road Drift/Touring cars the Ride Height should be no more than 5mm, for Buggys, Trucks, Truggys and Monster Trucks, as low as possible depending on the track conditions. If Body Roll is a problem, handling can be improved with the use of Stabilizers, Anti roll or Sway Bars, stiffer Tuning Springs and, or thicker Silicon Oil in the Dampers. Also find somewhere to mount the Transponder as low in the Chassis as possible.

▼ Scroll Down for More Articles and Advice ▼

Or, check out our RC Model Car Setup Guide

^ TOP ^












Manufacturers and Brands Catalogued and Listed by RC-Scrapyard.


   At present, the RC Model Manufacturers, Brands and Distributors covered by us are: ABC Hobby, Academy, Acme Racing, Agama Racing, Amewi, Ansmann Racing, ARRMA, Team Associated, Atomic RC, Axial, AYK, Bolink, BSD Racing, Capricorn, Carisma, Carson, Caster Racing, Cen, Corally, Custom Works, Durango, Duratrax, ECX - Electrix, Exceed RC, FG Modellsport, FS-Racing, FTX, Fujimi, Gmade, GS-Racing, Harm, HBX, Helion, Heng Long, Himoto Racing, Hirobo, Hitari, Hobao, Hong-Nor, Hot Bodies, HPI, HSP, Intech, Integy, Jamara, JQ Products, Kawada, Kyosho, Losi, LRP, Maisto, Mardave, Marui, Maverick, MCD Racing, Megatech, Mugen, New Bright, Nichimo, Nikko, Nkok, Ofna, Pro-Pulse, Protech, PTI, RC4WD, Redcat Racing, RJ-Speed, Robitronic, Schumacher, Seben, Serpent, Smartech, Sportwerks, Step-Up, Tamiya, Team-C Racing, Team Magic, Thunder Tiger, Tomy, Top Racing, Traxxas, Trinity, Tyco, Vaterra RC, Venom, VRX Racing, WLToys, X-Factory, Xmods, Xpress, Xray, XTM, Yankee RC, Yokomo, ZD Racing and Zipzaps.

   This is an ongoing project, with new and "lost in time" RC Model Brands being added as they are found and although most of those listed above have been covered in relative detail, some are still being researched and will be completed in the near future.


















Hints and Tips

Decals

   After spending lots of time and effort to paint your bodyshell, you come to the point where you make it look good by putting on all those flashy decals, but before you rush in with the scissors and start cutting, there are a few things you should do first.

   Good preparation is key to a perfect job, so before you do anything with your decals, you must first of all wash your hands and then make sure the bodyshell is clean and no oil or grime from your previously grubby fingers remains on the Polycarbonate Lexan surface. Methylated spirits is the thing to use, or failing that, use one of those wipes you use for your computer monitor screen. As the body shell dries, you can carefully cut out the decals from the sheet. Do the big ones first and leave the smallest ones for last.

   Now you can prepare to the decals for positioning. Carefully remove the backing paper from the decal with your thumb nail and then put it back on again, but slightly out of line. Place the decal in the position you want it on the bodyshell and when you are satisfied, press down the sticky corner onto the bodyshell and peel off the backing paper, following it along with your fingers to avoid any bubbles. Repeat the process until all your decals are in place.

   Any bubbles or misfitting areas can be corrected by using a sharp modelling knife to carefully pierce the bubbles, or score the poorly fitting area and complete the process with your finger nail.

   Some misalignments can often be fixed using a hair dryer on the offending decal to soften the glue enough to allow you to reposition it, but be careful; Lexan can react like heat-shrink and may wrinkle if you use too much heat.

For More Setup Information check out my Hints and Tips page.







Hints and Tips

On Road Indoor Carpet Tires


   Some indoor carpet tracks do not allow you to use anything but foam tires. The reason being the wear on the carpet some soft rubber tires, such as Proline Hawgs and Schumacher pin-spikes can create. But on some tracks, where a combination of carpet and wooden board is used, rubber tires may be allowed.

Sponge or Foam Tires


   Basically there are three foam compounds available: Soft, Medium and Hard.
   Soft foam tires will normally provide the best grip on most carpeted tracks, but wear faster than other compound tires. They also wear unevenly. Cornering always puts more stress on the outside wheels, so naturally they will wear more. Therefore, in an effort to even out that wear, the wheels must be swapped over from side to side after each race and re-trued before the next race meeting.

   Incidentally, if you are looking to learn or hone your drifting skills, try a set of hard compound foam tires. They may not be the best tires to win races on a carpet track, but the fun level is brilliant.

Foam Tire Additive


   Most indoor carpet tracks allow some kinds of tire additive, but not all. One guy at our local track, used to dip his foam tires in a glass of light ale.

   Although this form of additive may seem a little odd, there are a high number of weird and wonderful concoctions used by racers in the RC world and just as many available commercially, most of which will improve grip if that is what you want.

Rubber Tires for Indoor Tracks


   Unlike outdoor racing where track temperature comes into play, indoor tire choice is comparatively easy.

   On tracks where rubber tires are allowed, with a combination of carpet, board or other surface type, the choice of tire is generally determined by the areas of track where the grip is least. Local knowledge on these tracks is always helpful as a starting point, but don't always accept any suggestions as being the best. Trial and error, on your practice laps, before racing begins in earnest, can often highlight a different tire more suited to your particular driving style.

   Also check out my article for On-Road Tarmac Tires.

For More Setup Information check out my Hints and Tips page.










On/Off Road
RC Models:

Radio
Equipment:

Accessories: