RCScrapyard ► Tamiya Super Champ. ITEM: #58034 - For Sale in The USA.

Tamiya Buggys RCScrapyard: New, used, second hand radio controlled models, parts and spares.
Established 1999
Tamiya Monster Buggy
Site Search
Complete RC Model Listings    USA - Sitemap UK - Sitemap AU - Sitemap CA - Sitemap ES - Mapa del sitio IE - Sitemap DE - Sitemap FR - Plan du Site IT - Mappa del sito NL - Sitemap AT - Sitemap CH - Sitemap    From Around The WORLD

Tamiya Super Champ - #58034

1/10 Scale Electric RC Buggy:

  Released in December 1982, the 2WD Super Champ off-road buggy was built to race and subsequently, most racers of this model agreed how easy it was to drive.
  The improved off road Swing arm rear with coil over mono-shock, trailing arms front with hairpin springs, oil filled metal damper suspension coupled with new spike tires for more grip and improved handling, made the Super Champ a serious contender at many race meetings.
  As with all Tamiya models, the highly detailed Super Champ ABS plastic body shell was phenomenal and emulated the real thing perfectly.
  The Super Champ will always be a very collectable vintage Tamiya model and its stunning good looks make it an impressive model for display.
      Rating: 44 Stars out of 5 Reviewed by: RCScrapyard     Manual.


★ Tamiya Super Champ ★
Tamiya Super Champ - #58034






USA

Tamiya #58034: For Sale in the USA



USA - Sitemap UK - Sitemap AU - Sitemap CA - Sitemap ES - Mapa del sitio IE - Sitemap DE - Sitemap FR - Plan du Site IT - Mappa del sito NL - Sitemap AT - Sitemap CH - Sitemap


Tamiya Super Champ #58034 - Chassis
Tamiya Super Champ #58034 Chassis
Tamiya Super Champ #58034 - Body Shell
Tamiya Super Champ #58034 Body Shell

General Advice

  For those starting in Radio Controlled Racing, here are a few Hints and Tips: Firstly, buy a Kit not an RTR. That way, if something breaks you will have some idea how to fix it.
  Radio Controlled Models are easily broken. A-Arms, Wishbones and Shock Towers, are all weaknesses and must be protected. To do this you can line the body shell with polystyrene, shaped to suit the curves of your shell and held in position using Shoe Gum.
  The Steering Servo is also a weakness in crash situations, so get a Servo Saver. Also get Titanium Shafts, Turnbuckles, Drive Shafts, Dog Bones and CVD. The standard steel types are far too easily bent.
  Broken Gear teeth on Nylon / Plastic Spur Gears are a common problem, so after two or three runs check the nuts or self tapping screws that hold the Motor in position for security.
  If the Kit comes with Plastic Bushings, Hop up to a set of Shielded Ball Bearings.

For Car Setup Information check out our Hints and Tips page.

^ TOP ^


Click Here

Not Here?
Maybe Tomorrow.
♥ Add This Page to your Favorites (Ctrl+D) ♥

★ Tamiya Radio Controlled Model Accessories: ★
540 Electric Motors
Tamiya Motors
Battery Packs
Batteries + Chargers
Bearings and Bearing Sets
Tamiya Bearings
Body Shells
Tamiya Shells
Electronic Speed Controllers
Tamiya ESC
Radio Equipment
Tamiy Radio
Dampers
Tamiya Shocks
Tires
Tamiya Tires
Wheels / Rims
Tamiya Wheels

Hints and Tips

Radio Gear

How to avoid Interference.


1/  The first consideration when installing your Receiver into your Electrically Powered Model is to make sure it is well away from the Negative Battery terminal, and the Motor. The Magnetic field can cause stuttering type interference at times of high current draw (i.e., Fast Acceleration)

2/  Make sure the Ariel tube is long enough for the Ariel wire. The tip of this wire is highly sensitive and should be as high, and as far away from the Motor as possible (yup, its that magnetic field prob again)

3/  If all else fails, a simple tip that often works for all RC Model enthusiasts is to wrap the receiver in Aluminium Foil, to shield against any magnetic and external radio interference.

4/  As a last resort, to protect against servo twitch, try ferrite beads. (available at Radio Shack or Maplins) These are threaded over the red, white (or yellow) and black wires of each servo.

5/  If you are using a FET Servo, the installation of a choke (a small electrical component) in the positive feed wire will smooth out any current spikes and reduce the possibility of "servo twitch".

6/  Another thing you might try is a "glitch buster" or "stutter stopper". Basically, this is a capacitor that simply plugs into your Radio Receiver and attempts to keep a level voltage supply to the Radio system.

For More Setup Information check out my Hints and Tips page.



On/Off Road
RC Models:

Other RC Models:

Radio Equipment:

Accessories:
Buggys
Formula One
Monster Trucks
Rock Crawlers
Touring/WRC/Drift Cars
Trucks/Truggys


Airplanes
Boats/Ships
Helicopters
Motorcycles
Submarines
Tanks


Crystal Sets
Receivers
Servos
Transmitters


Batteries
Battery Chargers
Bearings
Body Shells
Dampers (Shocks)
Electric Motors


ESC
Nitro Engines
Pinion Gears
Spur Gears
Tires
Wheels