Tamiya Russian Heavy Tank JS-2 1944 ChKZ - Full Option Kit - # 23691
(Radio Controlled Model Review)

  Released by Tamiya on April 24, 2013, the Russian Heavy Tank JS-2 1944 ChKZ (# 23691) is the Factory Finished, Limited Edition RTR version.

  A front-mounted double gearbox, with two electric motors, operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high manoeuvrability. In addition, realistic engine sounds accompany the tank as it starts up, drives and stops to idle. The main gun can be elevated, depressed and swung to the left and right.

  The Russian Heavy Tank JS-2 was developed to overthrow the German Tiger I. The JS-2 was put into production in the latter half of WWII in December 1943 and had a long, powerful 122mm gun as well as superior mobility. From August 1944, modifications, including the removal of the hatch from the frontal armor, were carried out to achieve greater defensive ability. The JS-2 produced in the Chelyabinsk Kirov factory (ChKZ) had a distinctive one-piece cast rounded front section. The JS-2 showed great strength in the frontlines but also in anti-tank battles and it greatly contributed to the victory at the end of the Great War.

  This model comes with metal bushings, that after a short while, when dust and grit get into them, can actually wear into the metal drive shafts that spin in them - we recommend these should be replaced by a full set of steel shielded ball bearings ASAP.

Rating: 4 RCScrapyard

Choosing a Transmitter

   When you first started in RC, you may have purchased a package that came with the car kit, motor, battery, charger, ESC and radio system complete. The transmitter was probably just a basic steer wheel, or stick type, with nothing more than forward, reverse, left, right and simple trim settings to centralise the servo and ESC.

   After a while, as your enthusiasm grows and your experience increases, you will want to move on to a better radio system, with more setting options, but where do you begin?

   Choosing the right transmitter is a personal thing. It has to feel right, have the balance you like, not be too bulky for your hand size and have all the features you might need to set up your car to your driving style.

Bearing Seals

   If you were to ask anyone with a modicum of experience in RC, they will tell you that the best modification you can make to a basic RC model, is to add a set of ball bearings.

   Quite a few of the entrance level models at the time this article was written, come with plastic and sintered brass ring type bearings. If these bearings are installed in the model and coated with grease as advised in the car manual, dust and grit can be caught in that grease and be dragged into the bearing where it can abrade the shaft that spins in it and it won't be long before it becomes a very sloppy fit, causing all kinds of problems.

   But what should you look for when buying bearings? There are a number of types of seal used on ball bearings, and there is much debate concerning which is the best for RC.