RCScrapyard ► Radio Controlled (RC) Models, ► Modified Brushless and Brushed Motors, Parts and Spares for RC Models. For Sale in The USA, UK, Australia, Canada, Spain and Ireland (Eire)

RC Model Airplanes RCScrapyard: New, used, second hand radio controlled models, parts and spares.
Established 1999
Tamiya Monster Buggy
Site Search

Complete RC Model Listings    USA - Sitemap UK - Sitemap AU - Sitemap CA - Sitemap ES - Mapa del sitio IE - Sitemap DE - Sitemap FR - Plan du Site IT - Mappa del sito NL - Sitemap AT - Sitemap CH - Sitemap    From Around The WORLD
RC Motor
Manufacturers
and Distributors:
A to L

Align Motors
Ansmann Motors
Arrma Motors
Associated Motors
Atomik Motors
AXI Motors
Carson Motors
Castle Creations Motors
Checkpoint Motors
Conrad Motors
CopterX Motors
Corally Motors
Demon Power Motors
Dualsky Motors
Duratrax Motors
Dynamite Motors
EC-Energy Motors
E-Express Motors
E-Flite Motors
Electrifly Motors
Emax Motors
EMGC Motors
Epic Motors
Esky Motors
Etronix Motors
Exceed Motors
EZrun Motors
Fantom Racing Motors
FlowerPower Motors
Flyzone Motors
Graupner Motors
Great Planes Motors
Hacker Motors
Heli-Max Motors
Himax Motors
Hobbico Motors
Hobbymate Motors
HobbyWing Motors
HobbyZone Motors
HPI Motors
HSP Motors
Hype Motors
Igarashi Motors
INIX Motors
Integy Motors
Jamara Motors
KMS Motors
Kyosho Motors
Leopard Motors
Losi Brushless Motors
Losi Motors
LRP Motors

Modified Electric Motors

For Radio (Remote) Control Models
    For Sale in these Countries - Click on your Flag    
USAUS UK UK Australia AU Canada CA En venta en Espana ES Ireland IE
DEDE FRFR ITIT NLNL ATAT CHCH
★ Hints and Tips ★
  Learn How to Fine Tune your Electric Motor for more Torque and RPM. Learn the secrets of finding the right Pinion and Spur Gear setup for your driving style. Find out how to get the Best from your Bearings, Avoid Radio interference, and Servo Twitch. Discover how to of Charge your Batteries for more punch and performance.

★★ Motors By Turn - All Manufacturers: ★★
3.5 Turn
4 Turn
4.5 Turn
5 Turn
5.5 Turn
6 Turn
6.5 Turn
7 Turn
7.5 Turn
8 Turn
8.5 Turn
9 Turn
9.5 Turn
10 Turn
10.5 Turn
11 Turn
11.5 Turn
12 Turn
12.5 Turn
13 Turn
13.5 Turn
14 Turn
14.5 Turn
15 Turn
15.5 Turn
16 Turn
16.5 Turn
17 Turn
17.5 Turn
18 Turn
18.5 Turn
19 Turn
20 Turn
21 Turn
21.5 Turn
22 Turn
23 Turn
24 Turn
25 Turn
25.5 Turn
26 Turn
27 Turn
28 Turn
30 Turn
32 Turn
35 Turn
45 Turn
50 Turn
55 Turn
60 Turn
65 Turn
70 Turn
85 Turn

★ Radio Controlled Model Accessories: ★
Electric Motors
Motors by Can Size
Brushless Motors
Motors by Turns
Pinion Gears
Pinion Gears
Spur Gears
Spur Gears
Motor Heatsinks
Motor Heatsinks
Motor Armatures
Motor Armatures


Nothing listed?
try Clicking "Search"

RC Motor
Manufacturers
and Distributors:
M to Z

Mabuchi Motors
Maxtec Motors
Motraxx Motors
Muchmore Motors
Multiplex Motors
Mystery Motors
Nikko Motors
Novak Motors
Park Flyer Motors
Parkzone Motors
Parma Motors
Peak Motors
Power HD Motors
Racers Edge Motors
RCS Model Motors
RCTimer Motors
Redcat Racing Motors
Reedy Motors
Revell Motors
Revtech Motors
Ripmax Motors
Robbe Motors
Robitronic Motors
Scorpion Motors
Schumacher Motors
Schuur Speed Motors
Sky RC Motors
Speed Energy Motors
Speed Passion Motors
Syma Motors
Tamiya Motors
Team Orion Motors
Team Powers Motors
Team Wave Motors
Tekin Motors
Tekmodel Motors
Tenshock Motors
Thunder Power Motors
Thunder Tiger Motors
Traxxas Motors
Trinity Motors
Turborix Motors
Turnigy Motors
Venom Motors
Viper Motors
Xmods Motors
Xtreme Motors
Yeah Racing Motors
Yokomo Motors

USA

UK

AUS

CAN

ESP

IRL


^ Back To TOP ^
24dp Pinion Gears
24 dp
32dp Pinion Gears
32 dp
48dp Pinion Gears
48 dp
64dp Pinion Gears
64 dp
0.4 Module Pinion Gears
0.4 Module
0.5 Module Pinion Gears
0.5 Module
0.6 Module Pinion Gears
0.6 Module
0.7 Module Pinion Gears
0.7 Module
0.8 Module Pinion Gears
0.8 Module
1.0 Module Pinion Gears
1.0 Module
Spur Gears
Spur Gears


Click Here

Not Here?
It Might be Tomorrow.
★ Radio Controlled Model Accessories: ★
Gas/Nitro Engines
Nitro Engines
Bearings and Bearing Sets
Bearings
Body Shells - Touring, Buggy, Truck, Monster Truck - Painted and Unpainted
Body Shells
Radio Transmitters etc
Radio Equipment
Tires - Touring, Buggy, Truck, Monster Truck, Rock Crawler
Tires
Wheels/Rims - Touring, Buggy, Truck, Monster Truck, Rock Crawler
Wheels
Electronic Speed Controllers
ESC
Battery Packs
Batteries + Chargers
Electric Motors
Electric Motors

Hints and Tips


All you need to know about Electric Motors for Radio Controlled Models

Winds and Turns


Q/  What does 15x2 or 17x3 mean?
A/  The first number relates to the number of times the wires are wound round each of the 3 armature segments, the second number relates to the number of wires side by side. So a 15x2 would have 2 wires laid side by side and wrapped around each segment 15 times.


Q/  What is the difference in performance between a Low Turn motor (eg 11x1) and a High Turn motor (eg 27x1)?
A/  A Motor with Less Turns like an 11x1 means high current draw from the batteries which corresponds to less runtime, but More Power (Torque or Punch) Best for tracks with lots of corners and short straights where fast acceleration is needed. (use a small pinion)
Motors with More Turns like a 27x1 give you More runtime, but Less Power. So you get a smoother response and are therefore easier to drive. Better for less experienced drivers and Long straight, sweeping corner tracks. (with a large pinion) This is correct for Brushed, Modified and Stock Motors as well as Brushless Motors.


Q/  How do the number of winds effect a motor?
A/  A Motor with More Winds (number of wires eg 13x5) is less demanding on the battery, and smoother in acceleration. Best for low grip, slippery tracks.
A Low Wind Motor (eg 11x1) is more punchy and can be difficult to handle. Best on high grip, hot weather Tarmac, or indoor carpet, high acceleration, low speed tracks.


Advance and Retard


Q/  What is Advance and Retard?
A/  On the Endbell of a Modified Motor (where the brushes fit) you will find two screws that hold the Endbell to the Can. If these screws are slackened off slightly the Endbell can then be twisted either Clockwise (Advance) or Anticlockwise (Retard). On Sensorless Brushless Motors this adjustment can generally be made in a similar way (although there are some Brushless Motors that have fixed timing for Spec level racing). Sensored Motors can be adjusted via the ESC.


Q/  What does "Advancing" the Endbell position do?
A/  Advancing the Endbell Reduces runtime, increases Punch (acceleration) and RPM to give a higher top speed.
On the down side, for Brushed Motors, the brushes wear faster and the increased current draw creates more arcing thus increased heat and Commutator (Comm) wear. Brushless Motors can lose some efficiency at the end of a race because of overheating due to increased current draw.


Q/  What does "Retarding" the Endbell position do?
A/  On both Brushed and Brushless Motors, Retarding the Endbell Increases runtime, decreases Punch (acceleration) and RPM to give a lower top speed and for Brushed Motors, brush wear and Commutator (Comm) wear is reduced.


Brushed Motor Basics


Q/  What is the effect of hard and soft Brushes?
A/  Basically, Hard brushes give a lower current draw, so consequently give longer run times and lower torque so less punch (acceleration)
Soft Brushes on the other hand increase current draw thus give higher torque and increased acceleration. Of course the down side of this is that Soft brushes wear much faster and must be changed more often. (I change mine when they get to around 5mm)


Q/  How does changing the brush spring change the motor?
A/  If you fit Stiffer Brush Springs your motor will have More power at low revs, and also a lower top speed. I only ever fit stiff springs on bumpy tracks to reduce brush bounce.
Weaker springs reduce power but increase RPM so give less acceleration but a higher top speed. Good for long, sweeping, smooth tracks, where you can carry good speed through the corners.


Brushless Motor Basics


Q/  What does the KV rating mean?
A/  KV stands for Kilovolts and indicates the RPM that Motor can achieve with no load per Volt of input.
If a Motor is rated as 4000 KV and is used with a 7.4 Volt Battery, the RPM achievable by that Motor will be ...
4000 x 7.4 = 29600 RPM.


Q/  What is the difference between a Sensored and a Sensorless Motor?
A/  Sensored Brushless Motors have a cable that can be plugged into the motor itself and its accompanying ESC. This allows the ESC to monitor the performance of the Motor and regulate the Current output to the motor to provide smooth acceleration. Advance and Retard timing is automatically done for you to give torque for exiting corners and increased RPM for long straights.
Sensorless Brushless Motors have to be adjusted for Advance and Retard timing via the Endbell (as described above). These motors are cheaper than the Sensored type and do not provide the same control.


Q/  What is the difference between Inrunner and Outrunner Brushless Motors?
A/  Inrunner Brushless Motors have the electromagnets in the "Can" and the central Shafts (Rotors) are permanent magnets. The Rotor spins inside the "Can". Used mainly in RC Cars and Boats.
Outrunner Brushless Motors have the permanent magnets in the "Can" and the electromagnets in the Rotor. In this type the Rotor spins around a fixed Central Shaft, providing Lower RPM than the Inrunner, but increased Torque. Mostly used for model RC Airplanes and Helicopters.



General RC Model Electric Motor Tips.



1/   For top level Brushed Motor racing, strip, clean, skim and fit new brushes to your motor every 5 or 6 runs. And don't forget to oil the bearings with light sewing machine oil or ZX1. For Brushless Motors, Clean and re-oil the bearings every 2 or 3 meetings (Check out our "get the best from your bearings" section).

2/   Never over gear your motor. On Brushed Motors, check the brushes after each run and if the ends of the brushes are blue (this means the lubrication in the brushes has been burnt away and is causing increased friction and wear on the comm.) change them straight away and either lower your gearing or fit a weaker spring. If you don't have weaker springs you can try bending a pair of stiff springs with a pair of snipe nose pliers.

3/   A cool motor is an efficient motor. And that goes for Brushless as well as Brushed Motors.
Have you ever noticed that as the race nears the last minute or so your car seems to lose its punch out of the corners. Well some of this may be due to your batteries dumping (batteries lose their efficiency as they get hotter - ever heard of temperature resistance? You have now.) but your motor also loses power due to heat, as the magnets become less efficient.
My best tip, and some regard as controversial, is to get yourself a can of liquid nitrogen spray (The kind of thing doctors use to freeze off warts) and lightly spray the motor innards through the endbell just before a race. But remember don't overdo this as it can cause damage. You have been warned.

4/   On Brushed Motors, to increase power, reduce friction, arcing and therefore heating the motor to some degree, try a drop of ZX1 on the face of each brush before a run. The effect only lasts maybe 3 or 4 laps but it may be enough to get your nose infront.

5/   During a re-build of your Brushless Motor, when you come to replace the Rotor, place a rolled up piece of paper into the Can to protect against damage, then carefully pull the paper out before replacing the endbell.

For More Setup Information check out my Hints and Tips page.




Hints and Tips

Radio Gear

How to avoid Interference.


1/  The first consideration when installing your Receiver into your Electrically Powered Model is to make sure it is well away from the Negative Battery terminal, and the Motor. The Magnetic field can cause stuttering type interference at times of high current draw (i.e., Fast Acceleration)

2/  Make sure the Ariel tube is long enough for the Ariel wire. The tip of this wire is highly sensitive and should be as high, and as far away from the Motor as possible (yup, its that magnetic field prob again)

3/  If all else fails, a simple tip that often works for all RC Model enthusiasts is to wrap the receiver in Aluminium Foil, to shield against any magnetic and external radio interference.

4/  As a last resort, to protect against servo twitch, try ferrite beads. (available at Radio Shack or Maplins) These are threaded over the red, white (or yellow) and black wires of each servo.

5/  If you are using a FET Servo, the installation of a choke (a small electrical component) in the positive feed wire will smooth out any current spikes and reduce the possibility of "servo twitch".

6/  Another thing you might try is a "glitch buster" or "stutter stopper". Basically, this is a capacitor that simply plugs into your Radio Receiver and attempts to keep a level voltage supply to the Radio system.

For More Setup Information check out my Hints and Tips page.




On/Off Road
RC Models:

Other RC Models:

Radio Equipment:

Accessories:
Buggys
Formula One
Monster Trucks
Rock Crawlers
Touring/WRC/Drift Cars
Trucks/Truggys


Airplanes
Boats/Ships
Helicopters
Motorcycles
Submarines
Tanks


Crystal Sets
Receivers
Servos
Transmitters


Batteries
Battery Chargers
Bearings
Body Shells
Dampers (Shocks)
Electric Motors


ESC
Nitro Engines
Pinion Gears
Spur Gears
Tires
Wheels