RCScrapyard ► Radio Controlled (RC) Models, Parts and Spares ► Gmade R1 Rock Buggy, Rock Crawler Models, For Sale in The USA, UK, Australia, Canada, Spain and Ireland (Eire)

Nitro RC Models RCScrapyard: New, used, second hand radio controlled models, parts and spares.
Established 1999
Electric RC Models
Site Search

Complete RC Model Listings    USA - Sitemap UK - Sitemap AU - Sitemap CA - Sitemap ES - Mapa del sitio IE - Sitemap DE - Sitemap FR - Plan du Site IT - Mappa del sito NL - Sitemap AT - Sitemap CH - Sitemap    From Around The WORLD

1/10 Scale Electric Rock Crawler:

List of over 50 Other Rock Crawlers:Link

Gmade R1 Rock Buggy

Radio (Remote) Control Models Parts and Spares
    For Sale in these Countries - Click on your Flag    
USAUS UK UK Australia AU Canada CA En venta en Espana ES Ireland IE
DEDE FRFR ITIT NLNL ATAT CHCH
★ How To, Hints and Tips for the Gmade R1 Rock Buggy ★
  Learn the secrets of how to avoid Radio interference and Servo Twitch on your Gmade R1 Rock Buggy Model.
  Our simple guide will help you choose the right Electric Motor for your R1 Rock Buggy Model and discover the difference between a single, double or triple wind motor, what advance and retard is and how it can affect the torque and RPM of your motor.
  Find out how to get the best from your Gmade Models Bearings with a few common sense hints and tips.
  Discover the differences between Ni-Cad, Ni-Mh and Li-Po Batteries and the safest way to charge them.

★ Gmade R1 Rock Buggy ★
Gmade R1 Rock Buggy - 1:10 Electric Rock Crawler


★ Radio Controlled Model Accessories: For Sale: ★
Electric Motors
Electric Motors
Battery Packs
Batteries + Chargers
Bearings and Bearing Sets
Bearings
Body Shells - Touring, Buggy, Truck, Monster Truck - Painted and Unpainted
Body Shells
Electronic Speed Controllers
ESC
Gas/Nitro Engines
Nitro Engines
Pinion Gears
Pinion Gears
Battery Chargers
Battery Chargers
Radio Transmitters etc
Radio Equipment
Servos
Servos
Tires - Touring, Buggy, Truck, Monster Truck, Rock Crawler
Tires
Wheels/Rims - Touring, Buggy, Truck, Monster Truck, Rock Crawler
Wheels

Nothing listed?
try Clicking "Search"

RC Airplanes
Airplanes
RC Boats and Ships
Boats and Ships
RC Buggys
Buggys
RC Formula One Cars
F1 Cars
RC Helicopters
Helicopters
RC Monster Trucks
Monster Trucks
RC Touring/WRC/Rally Cars
Touring/WRC/Drift
RC Trucks
Trucks

USA

UK

AUS

CAN

ESP

IRL



Click Here

Not Here?
It Might be Tomorrow.
Or, for Common items, try a similar Model or Chassis type.
★ Radio Controlled Model Accessories: ★
Gas/Nitro Engines
Nitro Engines
Bearings and Bearing Sets
Bearings
Body Shells - Touring, Buggy, Truck, Monster Truck - Painted and Unpainted
Body Shells
Radio Transmitters etc
Radio Equipment
Tires - Touring, Buggy, Truck, Monster Truck, Rock Crawler
Tires
Wheels/Rims - Touring, Buggy, Truck, Monster Truck, Rock Crawler
Wheels
Electronic Speed Controllers
ESC
Battery Packs
Batteries + Chargers
Electric Motors
Electric Motors

Hints and Tips

Radio Gear

How to avoid Interference.


1/  The first consideration when installing your Receiver into your Electrically Powered Model is to make sure it is well away from the Negative Battery terminal, and the Motor. The Magnetic field can cause stuttering type interference at times of high current draw (i.e., Fast Acceleration)

2/  Make sure the Ariel tube is long enough for the Ariel wire. The tip of this wire is highly sensitive and should be as high, and as far away from the Motor as possible (yup, its that magnetic field prob again)

3/  If all else fails, a simple tip that often works for all RC Model enthusiasts is to wrap the receiver in Aluminium Foil, to shield against any magnetic and external radio interference.

4/  As a last resort, to protect against servo twitch, try ferrite beads. (available at Radio Shack or Maplins) These are threaded over the red, white (or yellow) and black wires of each servo.

5/  If you are using a FET Servo, the installation of a choke (a small electrical component) in the positive feed wire will smooth out any current spikes and reduce the possibility of "servo twitch".

6/  Another thing you might try is a "glitch buster" or "stutter stopper". Basically, this is a capacitor that simply plugs into your Radio Receiver and attempts to keep a level voltage supply to the Radio system.

For More Setup Information check out my Hints and Tips page.


General Advice

  For those starting in Radio Controlled Racing, here are a few Hints and Tips: Firstly, buy a Kit not an RTR. That way, if something breaks you will have some idea how to fix it.
  Radio Controlled Models are easily broken. A-Arms, Wishbones and Shock Towers, are all weaknesses and must be protected. To do this you can line the body shell with polystyrene, shaped to suit the curves of your shell and held in position using Shoe Gum.
  The Steering Servo is also a weakness in crash situations, so get a Servo Saver. Also get Titanium Shafts, Turnbuckles, Drive Shafts, Dog Bones and CVD. The standard steel types are far too easily bent.
  Broken Gear teeth on Nylon / Plastic Spur Gears are a common problem, so after two or three runs check the nuts or self tapping screws that hold the Motor in position for security.
  If the Kit comes with Plastic Bushings, Hop up to a set of Shielded Ball Bearings.

For Car Setup Information check out our Hints and Tips page.


On/Off Road
RC Models:

Other RC Models:

Radio Equipment:

Accessories:
Buggys
Formula One
Monster Trucks
Rock Crawlers
Touring/WRC/Drift Cars
Trucks/Truggys


Airplanes
Boats/Ships
Helicopters
Motorcycles
Submarines
Tanks


Crystal Sets
Receivers
Servos
Transmitters


Batteries
Battery Chargers
Bearings
Body Shells
Dampers (Shocks)
Electric Motors


ESC
Nitro Engines
Pinion Gears
Spur Gears
Tires
Wheels